Hand Held Testing Meters
AQUASOL DIGITAL - HANDHELD METERS
Our range of portable hand held testers are, waterproof and dustproof meters that float if dropped in liquid.
Features :
- Microprocessor based Fast, Reliable and Accurate measurement.
- Replaceable Electrode Module.
- Waterproof Impact resistant ABS case (IP 57).
- Large LCD display for reading convenience.
- Easy Calibration.
- Available in a portable pouch.
Technical Specification
| Parameter |
pH |
Conductivity |
|
TDS |
|
ORP |
| Model |
AM-PH-01 |
AM-COND-01 |
AM-COND-02 |
AM-TDS-01 |
AM-TDS-02 |
AM-ORP-01 |
| Range |
0 to 14 |
0 to 19990 µS |
0 to 1999 µS |
0 to 19990 PPM |
0 to1999 PPM |
± 1999 mV |
| Accuracy |
± 0.1 |
± 1% FS |
± 1% FS |
± 1% FS |
± 1% FS |
± 2% FS |
| Resolution |
0.1 pH |
10 µS/cm |
1 µS/cm |
10 PPM |
1 PPM |
1 mV |
| Power |
3V x 2 Lithium Batteries CR2032 |
|
|
|
|
| Dimension |
33.5 mm x 170 mm |
|
|
|
|
| Weight |
85g |
|
|
|
|
|
AQUASOL DIGITAL - HANDHELD DISSOLVED OXYGEN METERS
Our unique designed and engineered DO meters are handheld, waterproof and dustproof that float if dropped in liquid. Its compact design and technology helps to measure Dissolved Oxygen / Oxygen Percentage very effectively at the same time. Testing with portable oxygen meters determines whether or not you have optimal dissolved oxygen levels necessary for good water quality. For accurate results this test should be performed on site. Our handheld type DO/O2 meter is ideal for such applications. These meters are cost effective and come encased in a protective carrying pouch for safety and portability.
Features :
- 49 Microprocessor based for fast and accurate measurements.
- 50 Large LCD display DO and Temperature readings simultaneously.
- Simple to calibrate by one keyboard and ATC.
- Memory with Data-hold and Max/Min and shows PTS after calibration.
- Easy to replace the DO probe module.
Technical Specification
| Parameter |
DO |
O2 |
Temp |
| Model |
AM-DO-01 |
|
|
| Range |
0 to 20 mg/L |
0 to 200% |
0 to 90 Deg C |
| Accuracy |
±0.2 + 1digit |
± 2% FS |
±0.2+1 digit |
| Resolution |
0.01 |
0.1 |
0.1 |
| ATC |
0 – 50 Deg C |
|
|
| Power |
AAA - DC 1.5V x 4 Batteries |
|
|
| Dimensions |
Meter: 195 x 40 x 36 mm, Kit: 230 x 205 x 50 mm |
|
| Weight |
Meter with Battery: 135g , Gross: 800g |
|
AQUASOL DIGITAL - HANDHELD MULTIPARAMETER METERS
Our Multi-Parameter Meter is handheld, waterproof and dustproof that float if dropped in liquid. Its compact design and technology help to measure pH, Conductivity, TDS, Salt and Temperature at the same time. An important feature of the testers is a replaceable electrode within a reusable tester body. The microprocessor-based meter gives accurate readings in fluctuating temperatures and can be easily calibrated. These meters are cost effective and come encased in a protective carrying pouch for safety and portability.
Features :
- Microprocessor based for fast and accurate measurements.
- Weatherproof Case and compact Design.
- Memory and Storage function
- Memory with Data-hold and Max/Min and shows PTS after calibration.
- Easy to replace the probe module.
Technical Specification
| Parameter |
pH |
ORP |
|
Conductivity |
TDS |
Salt |
Temp. |
| Model No |
AM-AL-01 |
Range |
(-)2.00 to 16.00 |
(-)1999 to (-)200 mV |
0.0 to 199.9μS |
0.0 to 131.9 ppm |
0.0 to 99.9 ppm |
0 to 110 Deg C |
| (-)199.9 to 499.9 mV |
200 to 1999μS |
132 to 1319 ppm |
100 to 999 ppm |
500 to 2000 mV
|
2.00 to 19.99 mS |
1.32 to 13.19 ppt |
1.00 to 9.99 ppt |
20.0 to 100.0 mS |
13.2 to 66.0 ppt |
10.0 to 50.0 ppt |
| Accuracy |
±0.01 + 1 Digit |
± 2+1 digit |
±2% FS |
±2% FS |
±2% FS |
±0.2 + 1 Digit |
| Resolution |
0.01 pH |
1/0.1/1 mV |
0.1/1 μS
0.01/0.1 mS |
0.1/1 ppm
0.01/0.1 ppt |
0.1/1 ppm
0.01/0.1 ppt |
0.1 Deg C
|
| Compensation |
ATC: 0-100 ℃ |
N/A |
|
ATC: 0-50 Deg C |
ATC: 0-50 Deg C |
ATC: 0-50 Deg C |
N/A |
| Power |
AAA - DC 1.5V x 4 Batteries |
| Dimension |
42 x 33 x 183 mm |
| Meter Weight |
160 g |
AQUASOL DIGITAL - PORTABLE CHLORINE METER
To make on site testing easy and simple we have a specially designed Chlorine portable meter which enables a user to analyse free / Total Chlorine on site with higher accuracy. The meter is supplied in a weatherproof hard plastic case that is ultra light with all the accessories which are required to carry out test on site. These meters have a to carry on site. They are provided with large LCD display and advance memory storage functionalities.
Features :
- Microprocessor based fast, reliable and accurate measurements.
- Spectrophotometric Method for Detailed Analysis.
- Reagents & Standards Based on International Methods.
- Low Cost Chlorine Reagents.
- Weatherproof Hard Case and Compact Design.
- Large LCD display for reading convenience.
- Memory and Storage function
Technical Specification
| Parameter |
Free / Total Chorine |
| Model |
AP-CL-01 |
| Range |
0 to 5 ppm |
| Resolution |
0.01 ppm |
| Accuracy |
± 0.03 + 1 digit at 2 ppm |
| ± 3% FS + 1 digit at 2 ppm |
| Response |
5 seconds |
| Reagent |
FC1 + TC1 (250 Tests Each) |
| Power |
AAA - DC 1.5V x 4 Batteries |
| Dimension |
70 x 135 x 65 mm |
| Weight |
168 g |
|
|
Reagent ( FC1 & TC1 )
| Parameter |
Free Chlorine |
Total Chlorine |
| Model |
AP-CL-FC1 |
AP-CL-TC1 |
| No. Of Test |
250 |
250 |
| Dealer Price (Rs) |
578 |
735 |
| MRP (Rs) |
850 |
1080 |
|
